Richiesta info +39 035.4380262
MC-250
C-FRAME PRESSES
STANDARD EQUIPMENT
- Siemens main motor with Siemens G120C drive;
- Hydraulic safety overload;
- Changing stroke semi-automatic with automatic cams adjustment;
- Die space adjustment by brake motor with digital display;
- Autotatic lubrication system with gear driven pump and progressive distributor;
- PLC Siemens S7-1200 for management of press’ auxiliaries functions;
- Siemens HMI;
- Sick Flexy Soft module for press’ safety management;
- Profinet communication
ON DEMAND
- Automatic stroke length adustment;
- Air cushion;
- C-link, slow down speed of slide near B.D.C ;
- Electronic cams;
- Bsafety barriers type 4;
- Antivibration feet;
- Assistance via internet;
TECHNICAL DATA
| Press capacity | kN | 2500 |
| Tonnage rating point | mm | 8 |
| Workable dimensions | mm | 1400×800 |
| Diameter hole in worktable | mm | 250 |
| Workable thickness | mm | 200 |
| Second worktable thickness | mm | 100 |
| Slide table dimensions | mm | 950×700 |
| Number of guides | n° | 8 |
| Dimensions of hole in the slide | mm | 70/140 |
| Outputs per minute adjustable | n° | 30:60 |
| Stroke lenght adjustment min-max | mm | 0-220 |
| Slide adjustment | mm | 120 |
| Die space (max stroke down adjustment up) |
mm | 500 |
| Distance between shoulders | mm | 820 |
| Projection from center | mm | 410 |
| Blank holder diameter | mm | 460 |
| Main motor power | Kw | 30 |
| Voltage auxiliares | V | 24 |
| Voltage electronic | V | 24 |
| Voltage main | V-Hz | 400-50 |
| Overall dimensions | mm | H 4250 L 1600 P 2900 |
| Weight | Kg | 24000 |
Mappa