Richiesta info +39 035.4380262
MC-25
C-FRAME PRESSES
STANDARD EQUIPMENT
- Semi autometic stroke length adjustment;
- Siemens main motor with Siemens G120C drive;
- Hydraulic safety overload;
- Changing stroke semi-automatic;
- Die space adjustment by key;
- Autotatic lubrication system with gear driven pump and progressive distributor;
- PLC Siemens S7-1200 for management of press’ auxiliaries functions;
- Siemens HMI;
- Sick Flexy Soft module for press’ safety management;
- Profinet communication;
ON DEMAND
- Automatic stroke length adustment;
- Air cushion;
- C-link, slow down speed of slide near B.D.C ;
- Electronic cams;
- Bsafety barriers type 4;
- Antivibration feet;
- Assistance via internet;
TECHNICAL DATA
| Press capacity | kN | 250 |
| Tonnage rating point | mm | 3 |
| Workable dimensions | mm | 700×350 |
| Diameter hole in worktable | mm | 110 |
| Workable thickness | mm | 70 |
| Second worktable thickness | mm | 70 |
| Slide table dimensions | mm | 460×270 |
| Number of guides | n° | 8 |
| Dimensions of hole in the slide | mm | 40/60 |
| Outputs per minute adjustable | n° | 70:120 |
| Stroke lenght adjustment min-max | mm | 0:110 |
| Slide adjustment | mm | 50 |
| Die space (max stroke down adjustment up) |
mm | 250 |
| Distance between shoulders | mm | 440 |
| Projection from center | mm | 185 |
| Main motor power | Kw | 3 |
| Voltage auxiliares | V | 24 |
| Voltage electronic | V | 24 |
| Voltage main | V-Hz | 400-50 |
| Overall dimensions | mm | H 2350 L 890 P 1040 |
| Weight | Kg | 3000 |
Mappa